วันจันทร์ที่ 13 กรกฎาคม พ.ศ. 2558

How To Close Warning Massege

In Internet Explorer:

Tools menu --> Internet Options --> Security tab
Click Local Intranet icon to select it
Click Sites
Check Automatically detect intranet network
Click Advanced
In the Add this website to the zone: text box type file://computername or IP (in your case file://path).
Click Add
Click Close, OK, and OK again to exit Internet Options.
Alternatively, you may uncheck the Automatically detect intranet network, and check the other three checkboxes. This saves you from having to enter each machine name manually, but allowing all network paths is probably not secure.

Also see http://local.nu/HelpDesk/index.php/Open_File_-_Security_Warning

วันจันทร์ที่ 30 มีนาคม พ.ศ. 2558

วันพุธที่ 18 มิถุนายน พ.ศ. 2557

แก้ไข The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine (on Windows 64 bits)

เปิดไฟล์.vbproj และเพิ่ม < PlatformTarget >x86< /PlatformTarget > ลงใน

< PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' " >
และ
< PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' " >

อ้างอิง
http://www.bloggang.com/viewdiary.php?id=pui034&month=08-2009&date=29&group=13&gblog=11
http://social.msdn.microsoft.com/Forums/en-US/adodotnetdataproviders/thread/45aa44dd-0e6f-42e5-a9d6-9be5c5c8fcd1

วันเสาร์ที่ 14 มิถุนายน พ.ศ. 2557

แก้ไข Kaspersky ไม่โหลด Licence

Kaspersky Endpoint Security 8 for Windows CF1 version 8.1.0.831(a,b,c ): Patch D released


On February 21, 2013 Kaspersky Lab announced the release of Patch D for Kaspersky Endpoint Security 8 for Windows (version 8.1.0.831).
Patch D includes fixes covered by pf80 for issues related to Patch B:
  • hanging of the operating system;
  • slow launch of software installed;
  • absence of Kaspersky Anti-Virus icon in the system tray.
Patch D applies to the following versions of Kaspersky Anti-Virus:
Kaspersky Endpoint Security 8 for Windows version 8.1.0.831 (a);
Kaspersky Endpoint Security 8 for Windows version 8.1.0.831 (a,b);
Kaspersky Endpoint Security 8 for Windows version 8.1.0.831 (a,b,c);
Kaspersky Endpoint Security 8 for Windows version 8.1.0.831 (a,b,c, pf80);
Kaspersky Endpoint Security 8 for Windows version 8.1.0.831 (a,b,c, pf82).
Patch D is distributed using the Update application modules task.
 If the Update application modules task fails on a client computer for some reason, e.g. due to Patch B installed, please do the following:
  1. Reboot the computer in Safe mode.
  2. Disable the Kaspersky Anti-Virus service.
  3. Then reboot in the normal mode.
  4. Install pf82 patch  locally or via Kaspersky Security Center.
Installing Patch D
Via Kaspersky Endpoint Security 8 for Windows GUI
To install Patch D automatically
  • Open the Settings tab in the main application window.
  • Go to Scheduled tasks > Update in the left part of the window..
  • Enable the Update application modules option.
  • Click Save.


Patch D will be automatically installed on the host during the next update session.
Reboot is required to apply the changes.


Via Kaspersky Security Center 9


To install Patch D automatically:
  • Open the Properties of a group task.
  • Enable the Update application modules option in both the Update settings for local mode and Update settings for mobile mode sections.
  • Click ОК.


Patch D will be automatically installed on the managed computers during the next update session.

Reboot is required to apply the changes.


How to check if Patch D isinstalled
Locally
After installing the patch and restarting the computer, the application version changes to 8.1.0.831 (а,b,c,d), 8.1.0.831 (а,b,c,d, pf80).
You can view the full version of the application by clicking Support in the lower part of the main application window.
The bl.ppl file changes its version in the installation folder:
bl.ppl (8.1.0.903)

Via Kaspersky Security Center 9

To view the full version of the application, open the Administration Console and do the following:


  • Go to the Reports and notifications node.
  • Open the Kaspersky Lab software version report properties.
  • Add the Updates installed field in the Detail fields section.
  • Click ОК to save the changes.
  • Generate the report.


The Updates installed field will show Patch D.


อ้างอิง http://support.kaspersky.com/9745

วันจันทร์ที่ 26 พฤษภาคม พ.ศ. 2557

Excel การ Split ข้อความ

ข้อความ 11111:22222
ใช้ =LEFT(A1,FIND(":",A1)-1) จะได้ 11111
ใช้ =RIGHT(A1,FIND(":",A1)-1) จะได้ 22222


วันเสาร์ที่ 24 พฤษภาคม พ.ศ. 2557

วิธีแก้ไข Profile Win7 เสีย (Join Domain)

1.Press on Start > Run >Regedit

2.Navigate to the following registry key :“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList”


3.Under ProfileList navigate to binary key’s like this: S-1-5-21-3656904587-1668747452-4095529-500
 

4.On the right side under ProfileImagePath you'll see the profile path.

5.Chose the one with the desired user and delete the long registry key like: “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList”

วันพุธที่ 15 มกราคม พ.ศ. 2557

การเปิดใช้งาน .Net ใน Windows 8 แบบ Offline

1. ใส่แผ่น Win8
2. ใช้คำสั่ง

Dism.exe /online /enable-feature /featurename:NetFX3 /All /Source:E:\sources\sxs /LimitAccess

**ตัวสีแดงจะเปลี่ยนตาม Drive ที่ใส่แผ่น Win8

วันพุธที่ 25 กันยายน พ.ศ. 2556

วันพฤหัสบดีที่ 25 กรกฎาคม พ.ศ. 2556

การใช้งาน lighttpd บน DNS320L FFP0.07

1. Copy Config
cp /ffp/etc/examples/lighttpd/lighttpd.conf /ffp/etc
2. Make Folder
mkdir -p /mnt/HD/HD_a2/www/pages
mkdir -p /mnt/HD/HD_a2/www/logs
mkdir -p /mnt/HD/HD_a2/www/tmp
3. ใช้ WinSCP ไป แก้ไข lighttpd.conf ที่ /ffp/etc
บรรทัดที่แก้มี
server.document-root         = "/mnt/HD/HD_a2/www/pages/"
server.upload-dirs              = ( "/mnt/HD/HD_a2/www/tmp" )
server.errorlog                    = "/mnt/HD/HD_a2/www/logs/error.log"
accesslog.filename            = "/mnt/HD/HD_a2/www/logs/access.log"
server.port                           = 88
4. Restart Lighttpd
/ffp/start/lighttpd.sh restart
5.ทดสอบการใช้งาน
นำไฟล์ index.html ไปไว้ที่ /mnt/HD/HD_a2/www/pages
เรียกใช้งาน IP:88

****** จากที่ทำการทดสอบพบว่า Lighttpd มัน Run เองแต่ไม่สามารถเข้าได้ให้ทำการเพิ่ม
 kickwebs_start()
{
    /ffp/start/lighttpd.sh stop
    echo "Kicking webs ..."
    killall webs
}
ตัวสีแดง ใน /ffp/start/kickwebs.sh

****** ต้องผ่านการลง FFP และเปิดใช้งาน SSH แล้ว ถ้ามีการลง Tranmission ให้เลือก Port ให้แตกต่างจากที่ใช้

อ้างอิง
http://www.internetearnings.com/how-to-install-lighttpd-php-on-dlink-dns-320/
http://wolf-u.li/4695/konfiguration-von-mysql-und-lighttpd-mit-php-unter-ffp-0-7/

วันจันทร์ที่ 15 กรกฎาคม พ.ศ. 2556

การสำรอง Driver

Driver ที่ Windows Update Download มาเก็บไว้อยู่ที่
C:\Windows\System32\DriverStore\FileRepository
สามารถเอาไปลงเครื่องอื่นๆได้ด้วย

วันจันทร์ที่ 8 กรกฎาคม พ.ศ. 2556

Install Transmission บน DNS320L

 อ้างอิง
*** http://klseet.com/index.php/d-link-dns-320-nas/173
*** http://nas-tweaks.net/371/hdd-installation-of-the-fun_plug-0-7-on-nas-devices/#Download
http://kylek.is-a-geek.org:31337/files/ffp/0.7-arm/
http://nas-tweaks.net/82/installing-and-uninstalling-packages-and-activation-and-deactivation-of-daemons-in-fonz-fun_plug/
http://forum.dsmg600.info/t2719-%5BREL%5D-Transmission.html
โปรแกรมที่ต้องใช้
1.Putty
2.WINSCP
3.Editplus
----------------
step 1
----------------
0. Install Plugin
โหลด
fun_plug =>> http://wolf-u.li/u/433
fun_plug.tgz =>> http://inreto.de/dns323/fun-plug/0.7/arm/fun_plug.tgz
จากนั้นนำไปวางที่ NAS
1. Change Device Root
usermod -s /ffp/bin/sh root
mkdir -p /ffp/home/root/
sed -ie 's#:/home/root:#:/ffp/home/root:#g' /etc/passwd
pwconv
### ถ้า  pwconv ขึ้น Error
pwconv: failed to change the mode of /etc/passwd- to 0600
#Before you run pwconv
cd etc
cp passwd passwd-
cd /
pwconv

2. Change Password
passwd
3. store password
wget http://wolf-u.li/u/172/ -O /ffp/sbin/store-passwd.sh
store-passwd.sh
4. Activate & enable SSH login
chmod a+x /ffp/start/sshd.sh
sh /ffp/start/sshd.sh start
จากนั้นใช้ Winscp ไปเพิ่ม 2 บรรทัดนี้
chmod 700 /ffp/var/lib/sshd/
chmod 700 /ffp/etc/ssh/ssh_*
ใน ffp/start/sshd.sh
ก่อนบรรทัด “proc_start $command”
5.หลังจากเปิด ssh แล้วจะ Dis Telnet แล้ว Reboot
chmod -x /ffp/start/telnetd.sh
reboot
6.หลังจาก Reboot มาแล้ว ถ้า ssh ยังไม่เปิด ให้ไปแก้ ##นำไปรวมกับข้อ 4 แล้ว
เพิ่ม
chmod 700 /ffp/var/lib/sshd/
chmod 700 /ffp/etc/ssh/ssh_*
ใน ffp/start/sshd.sh
ก่อนบรรทัด “proc_start $command”
จากนั้น Reboot และทดสอบ ssh
7. โหลด Transmission โดยใช้คำสั่ง
wget http://inreto.de/ffp/0.7/arm/packages/curl-7.21.4-arm-1.txz
wget http://kylek.is-a-geek.org:31337/files/ffp/0.7-arm/Transmission-2.76-arm-1.txz
8. ลง โดยใช้คำสั่ง
funpkg -i curl-7.21.4-arm-1.txz
funpkg -i Transmission-2.76-arm-1.txz
9.ติดตั้ง User และ Pass และ ที่เก็บไฟล์ โดยใช้คำสั่ง
su nobody -c "transmission-daemon -f -g /mnt/HD/HD_a2/.transmission-daemon -w ##Path## -t -u ##User## -v ##Pass## -a 127.0.0.1,192.168.*.*"
ตัวอย่าง
su nobody -c "transmission-daemon -f -g /mnt/HD/HD_a2/.transmission-daemon -w /mnt/HD_a2/Downloads -t -u Transmission -v 99999 -a 127.0.0.1,192.168.*.*"
มันจะรันไม่สำเร็จ จะค้างอยู่ที่หน้า Port ซักอย่าง ให้กด Ctrl+C
และใช้คำสั่ง Start มันใหม่
/ffp/start/transmission start
10.จากนั้นทดสอบเข้า Web UI โดย
IPADDRESS:9091
11.ตรวจสอบ CPU ใน NAS ถ้ามัน 100% ตอนโหลดBitให้ SSH ไปแก้ **แนะนำให้ทำเลยหลังจาก start transmission
rm /dev/random
rm /dev/urandom
และ
mknod -m 666 /dev/random c 1 8
mknod -m 666 /dev/urandom c 1 9
12.แก้ไขค่า Config Transmission




เกือบลืมอย่าลืมสร้าง Folder ที่เก็บไว้นะครับ จากนั้นค่อยนำไปใส่ใน Config

***************************จบครับ****************************


ปล.ผมไม่ได้เป็นคนต้นคิดนะครับ แต่เกิดจากอยากลองทำอะไรแปลกๆกับของที่ซื้อมาเลยหาข้อมูลและรวบรวมมาให้เท่านั้น (กันลืมส่วนตัวด้วย)

วันอังคารที่ 25 มิถุนายน พ.ศ. 2556

Error Message: Unable to open this internet site. The requested site is either unavailable or cannot be found. Please try again later......

วิธีแก้ปัญหา Internet Explorer Download แล้วขึ้น Error
เอาง่ายๆ เปิด Regedit แล้ว ลบ HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings ไปซะ จากนั้นรัน IE มาใหม่

อ้างอิง http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/error-message-unable-to-open-this-internet-site/758f7a64-b081-4981-814f-9a7a53434fb8
 
Support Engineer
Hi ThiaClark2010,

What is the version of Internet Explorer that you’re currently running?

This happens if theContent Type registry setting for .xml file types is incorrect. To resolve the problem, use one of the following methods:

Method 1: Register msxml3.dll file
a.    Click Start, click  All Programs, click Accessories, right-click  Command Prompt, and then click Run as administrator.
b.    Type the following command and press Enter.
regsvr32 msxml3.dll

Now check if you’re able to download files from Internet Explorer.


Method 2: Try the following registry fix
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows


a.    Start Registry Editor.
b.    For a per-user setting, locate the following registry key:
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
For a per-computer setting, locate the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
c.    On the Edit menu, click  Add Value.
d.    To override the directive for HTTPS connections, add the following registry value:
"BypassSSLNoCacheCheck"=Dword:00000001
To override the directive for HTTP connections, add the following registry value:
"BypassHTTPNoCacheCheck"=Dword:00000001
e.    Quit Registry Editor.

Now check if you’re able to download files from Internet Explorer.

Method 3: Reset Internet Explorer settings
If the issue still persists, then try resetting Internet Explorer settings.
http://support.microsoft.com/kb/923737

Hope this information is helpful and let me know if you need any further assistance.
Mouneshwar R – Microsoft Support

 

วันพุธที่ 15 พฤษภาคม พ.ศ. 2556

เปืดเมลล์ฟ้องหา Box ไม่เจอแล้วโปรแกรมปิดไปเลย Outlook 2003 2007 2010

ลบ Regข้างในนี้
[HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem\Profiles].
แล้วเปิดโปรแกรมใหม่อีกรอบ

อ้างอิง http://www.itexperience.net/2011/05/04/outlook-2010-error-cannot-open-your-default-email-folders-the-information-store-could-not-be-opened/


Outlook 2010 error “Cannot open your default email folders. The information store could not be opened”
Today I couldn’t start my Outlook 2010 client anymore. When launching Outlook, the following error message came up:
Cannot open your default email folders. The information store could not be opened.
I always start with some basic steps, that helped me most of the times when I had a problem with an Outlook profile. Those standard steps are listed at the bottom of this article. However, the problem involved with this information store thing could not be solved with my standard steps.
To solve the “Information store could not be opened” –error, I disabled the Compatibility mode on Outlook.exe (who actually did turn this on?! It just suddenly was enabled!)
To disable the Compatibility mode on the Outlook.exe application, do the following:
  1. Open Windows Explorer and navigate to your Office directory (default is “C:\Program Files\Microsoft Office\Office14” for Office 2010, but your Office may also be installed in Program Files (x86) )
  2. Right click the Outlook.exe and choose Properties
  3. Click the Compatibility tab and UNCHECK the “Run this program in compatibility mode for” option image thumb Outlook 2010 error “Cannot open your default email folders. The information store could not be opened”
  4. Click OK and try to launch Outlook again
If the Compatibility mode was not enabled, then your problem is caused by something else :)
Try my default steps to see if it solves your particular problem:
  • Try to Run outlook in safe mode from the Run As window. To do so, press WIN+R (Windows key+R), type “Outlook.exe /safe“ in the text field and click OK.
  • Recreate your outlook profile. To do so, click Start –> Control Panel –> Mail. Click Show Profiles. Remove your existing profile. Then click Add… to add a new profile. Try to start Outlook again.
  • Remove the Windows Messaging Subsystem keys in your registry. To do so, press WIN+R (Windows key+R), type “regedit“ in the text field and click OK. Navigate to [HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem\Profiles]. Delete the key that corresponds to the profile name that causes Outlook not to start. Try to start Outlook again.

วันจันทร์ที่ 22 เมษายน พ.ศ. 2556

The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2203

The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2203

Error:
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2203
Error Message:

Solution 1:
Log on to your computer with the administrator rights.
Solution 2:
Permission problems for the %windir%\installer folder – If the Windows Installer service does not have sufficient permissions to read and write to this folder, the installation will fail.
  • Click Start > Run > type %windir%\installer
  • Right click any blank area installer folder and select Properties
  • Under Security tab click Edit
  • Add a new User by clicking add
  • Search for Everyone
  • Give everyone full permission by Check the full permission block
  • Click Ok
Solution 3:
Disable real-time virus scanning during installation.
If you have a real-time virus scanner enabled, and it happens to be scanning the file in %windir%\installer at the same time as setup is trying to open the file and install from it, you will get this type of error.
Solution 4:
  • Click Start > Run > Type Services.msc
  • Stop windows Installer service
  • Start Windows Installer service
Solution 5:
  • Click Start > Run %temp%
  • Right click any blank area in the temp folder and select Properties
  • Under Security tab click Edit
  • Add a new User by clicking add
  • Search for Everyone
  • Give everyone full permission by Check the full permission block
  • Click Ok
  • Run Installer Again.

Ref. http://relyonsoft.com/techsupport/?p=995

วันจันทร์ที่ 8 เมษายน พ.ศ. 2556

MTP USB Device Driver Problem in Windows 7 X64 Iphone Samsung

I had the same iss - it's a known issue whereby Windows attempts to use the wrong driver to access the phone.


BACK UP YOUR REGISTRY!!! Editing the registry can be (read: IS) dangerous and can cause no end of pain if done incorrectly.

- To Back Up your Registry: Click Start menu and click "Run". Type "regedit". Click File, then choose export and type "iphone driver fix registry backup".
- Click Export and let it export the the registry to a file.

- To fix the issue: Follow the folder tree on the left to: hkeylocalmachine > system > current control set > control > class
- Find “{EEC5AD98-8080-425F-922A-DABF3DE3F69A}” down the LEFT hand side and click on it.
- Under the list on the RIGHT hand side find "UpperFilters"
- Right-Click UpperFilters and click delete
- Close the registry editor and restart your PC (without the iphone attached).
- Once restarted and logged back in, plug in your iphone and voila!  Windows will actually choose the correct driver and you'll be in like flynn.


แก้ปัญหา Iphone Ipod ไม่พบไดร์เวอร์  ลบ Key Registry UpperFilters

วันศุกร์ที่ 7 ธันวาคม พ.ศ. 2555

แก้ไขปัญหา Windows 7 เข้า Nas Bufforo HD-CELU2 ไม่ได้

They are using an older less secure method, you need to dumb down windows 7.
The "tech" you spoke with is CLUELESS. The Buffalo FAQ answers this same question.
click the start button and type secpol.msc in the search function.

Browse to "Local Policies" -> "Security Options".  Now look for the entry "Network Security: LAN Manager authentication level" and open it.  Click on the dropdown menu and select "Send LM & NTLM - use NTLMv2 session security if negotiated".  Apply the settings.


In the Advanced sharing settings page of Network and sharing center, you need to have it set as Work/Home profile.  Try
Make sure computers are the same workgroup for now (you can change it later)
Enable network discovery
Turn on  file and print sharing
Turn off password protected sharing
Turn on Use user accounts and passwords to connect to other computers

วันเสาร์ที่ 3 พฤศจิกายน พ.ศ. 2555

การแสดงหรือซ่อนค่าศูนย์ (Excel2010)

แสดงหรือซ่อนค่าศูนย์ทั้งหมดบนแผ่นงาน

  1. คลิกที่แท็บ แฟ้ม คลิก ตัวเลือก แล้วคลิกประเภท ขั้นสูง
  2. ภายใต้ แสดงตัวเลือกสำหรับแผ่นงานนี้ ให้เลือกแผ่นงาน แล้วให้เลือกทำอย่างใดอย่างหนึ่งต่อไปนี้
    • เมื่อต้องการแสดงค่าศูนย์ (0) ในเซลล์ต่างๆ ให้เลือกกล่องกาเครื่องหมาย แสดงเลขศูนย์ในเซลล์ที่มีค่าศูนย์
    • เมื่อต้องการแสดงค่าศูนย์ (0) เป็นเซลล์ว่าง ให้ยกเลิกการเลือกที่กล่องกาเครื่องหมาย แสดงเลขศูนย์ในเซลล์ที่มีค่าศูนย์

ใช้รูปแบบตัวเลขเพื่อซ่อนค่าศูนย์ในเซลล์ที่เลือก

ทำตามขั้นตอนต่อไปนี้เพื่อซ่อนค่าศูนย์ในเซลล์ที่เลือก ถ้าค่าในเซลล์หนึ่งของเซลล์เหล่านี้เปลี่ยนเป็นค่าที่ไม่ใช่ศูนย์ รูปแบบของค่าจะคล้ายกับรูปแบบตัวเลขทั่วไป
  1. เลือกเซลล์ซึ่งมีค่าศูนย์ (0) ที่คุณต้องการซ่อน
  2. บนแท็บ หน้าแรก ในกลุ่ม เซลล์ คลิกรูปแบบ แล้วคลิก เซลล์
  1. ในรายการ ประเภท ให้คลิก กำหนดเอง
  2. ในกล่อง ชนิด ให้พิมพ์ 0;-0;;@
 หมายเหตุ 
  • ค่าที่ซ่อนจะปรากฏเฉพาะในแถบสูตร หรือในเซลล์หากคุณทำการแก้ไขภายในเซลล์ และจะไม่ถูกพิมพ์ออกมา
  • บนแท็บ หน้าแรก ในกลุ่ม เซลล์ คลิกรูปแบบ แล้วคลิก เซลล์
  • เมื่อต้องการแสดงค่าที่ซ่อนอีกครั้ง ให้เลือกเซลล์ จากนั้นบนแท็บ หน้าแรก ในกลุ่ม เซลล์ ชี้ไปที่ รูปแบบ และคลิก จัดรูปแบบเซลล์ ในรายการ ประเภท ให้คลิก ทั่วไป เพื่อนำรูปแบบตัวเลขเริ่มต้นไปใช้ เมื่อต้องการแสดงวันที่หรือเวลาอีกครั้ง ให้เลือกรูปแบบวันที่หรือเวลาที่เหมาะสมในแท็บ ตัวเลข

ใช้การจัดรูปแบบตามเงื่อนไขเพื่อซ่อนค่าศูนย์ที่ส่งกลับโดยสูตร

  1. เลือกเซลล์ที่มีค่าศูนย์ (0)
  2. บนแท็บ หน้าแรก ในกลุ่ม ลักษณะ คลิกลูกศรที่อยู่ถัดจาก การจัดรูปแบบตามเงื่อนไข เลือก เน้นกฎของเซลล์ แล้วคลิก เท่ากับ
  1. ในกล่องด้านซ้าย ให้พิมพ์ 0
  2. ในกล่องด้านขวา ให้เลือก กำหนดการจัดรูปแบบเอง
  3. ในกล่องโต้ตอบ การจัดรูปแบบเซลล์ ให้คลิกแท็บ แบบอักษร
  4. ในกล่อง สี ให้เลือกสีขาว

ซ่อนค่าศูนย์ในรายงาน PivotTable

  1. คลิกรายงาน PivotTable
  2. บนแท็บ ตัวเลือก ในกลุ่ม ตัวเลือก PivotTable ให้คลิก ลูกศรที่อยู่ถัดจาก ตัวเลือก แล้วคลิก ตัวเลือก
  1. คลิกแท็บ เค้าโครง & รูปแบบ แล้วให้เลือกทำอย่างใดอย่างหนึ่งหรือมากกว่าต่อไปนี้
เปลี่ยนการแสดงค่าข้อผิดพลาด     เลือกกล่องกาเครื่องหมาย สำหรับค่าความผิดพลาด ให้แสดง ภายใต้ รูปแบบ ในกล่องดังกล่าว ให้พิมพ์ค่าที่คุณต้องการให้แสดงแทนข้อผิดพลาด เมื่อต้องการแสดงข้อผิดพลาดเป็นเซลล์ว่าง ให้ลบอักขระใดๆ ในกล่อง
เปลี่ยนการแสดงเซลล์ว่างเปล่า     เลือกกล่องกาเครื่องหมาย สำหรับเซลล์ที่ว่าง ให้แสดง ในกล่องดังกล่าว ให้พิมพ์ค่าที่คุณต้องการให้แสดงในเซลล์ว่าง เมื่อต้องการแสดงเซลล์ว่าง ให้ลบอักขระใดๆ ในกล่อง เมื่อต้องการแสดงค่าศูนย์ ให้ล้างกล่องกาเครื่องหมาย

Ref By http://office.microsoft.com/th-th/excel-help/HP010342447.aspx

ซ่อนสูตรและซ่อนค่าในเซลล์แบบ Advanced (Excel2010)

บางสูตรอาจจำเป็นต้องปกปิดไม่ให้เห็นถึงการคำนวณก็สามารถซ่อนสูตรไว้ได้ ครับ ซึ่งจะไม่สามารถมองเห็นสูตรได้ สามารถเห็นได้แค่เพียงผลลัพธ์ของสูตรในเซลล์เท่านั้น หรือจะซ่อนไม่ให้เห็นทั้งสูตรทั้งค่าในเซลล์ก็สามารถทำได้เช่นกัน ซึ่งเป็นซ่อนแบบ Very Hidden
A. การซ่อนสูตรสามารถทำได้ดังนี้
  1. คลุมพื้นที่ที่เป็นสูตร
  2. คลิกขวาแล้วเลือก Format Cells
  3. เลือกแถบ Protection แล้วทำเครื่องหมายตรง Hidden
  4. เข้าเมนู Tools เลือก Protection แล้วเลือก Protect Sheet จากนั้นกรอกหรือไม่กรอก Password แล้วแต่ความต้องการ แล้วคลิก OK
ผลของการทำตามข้างบนจะเป็นการซ่อนค่าในบรรทัด Formula bar ซึ่งเป็นการซ่อนสูตรไปในตัว แต่ยังสามารถเห็นค่าในเซลล์ได้
แต่ถ้าหากต้องการซ่อนแบบไม่ให้เห็นทั้งค่าในเซลล์และค่าบนบรรทัด Formula ให้ทำการซ่อนแบบ Very Hidden ตามด้านล่าง
B. การซ่อนแบบ Very Hidden
  1. คลุมข้อมูลที่ต้องการซ่อนค่า
  2. คลิกขวาแล้วเลือก Format Cells
  3. คลิกแถบ Number เลือก Custom
  4. ที่ช่อง Type: คีย์ ;;;
  5. ทำข้อ 3 และ 4 ในหัวข้อ A.
หากต้องการซ่อนแค่ค่าในเซลล์ แต่ให้มองเห็นค่าได้จาก Formula bar ก็ทำแค่ข้อ 1-4 ในหัวข้อ B. ครับ

Thk Ref http://snasui.blogspot.com/2009/03/advanced.html

วันศุกร์ที่ 19 ตุลาคม พ.ศ. 2555

แก้ไข ISA2006 RPC SERVER IS unavailable

Please Follow Registry

Hi,

Set these keys:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableRSS (set to 0)
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableTCPA (set to 0)

EnableTCPChimney and EnableSecurityFilters (both 0)



 
For more information:
 
You may experience network-related problems after you install Windows Server 2003 SP2 or the Scalable Networking Pack on a Windows Small Business Server 2003-based computer that has an advanced network adapter
http://support.microsoft.com/kb/936594


also do not forget to install ISA Server Supportability Update package: http://support.microsoft.com/?kbid=939455

_____________________________

Tarek Majdalani

MS Forefront Edge Security MVP
Website : http://www.elmajdal.net
Covering ISA Server/TMG, Windows Server 2008 & Windows 7,Windows 8

Twitter : @elmajdal

Ref : http://forums.isaserver.org/m_2002051837/mpage_1/key_/tm.htm#2002051837

วันอังคารที่ 4 กันยายน พ.ศ. 2555

การใช้งาน Static Route จดไว้หน่อย


ไม่แน่ใจว่า ใช้โปรแกรม access connection หรือเปล่า ถ้าใช้ก็ต้องตั้งไว้ว่า เวลาเปลี่ยนโปรไฟล์แล้ว ไม่ให้มัน disconnect. ด้วยน่ะครับ ไม่งั้นบางครับมันจะตัดไปเลย แต่ว่าส่วนใหญ่ถ้าต่อด้ายสายแลนไม่เป็นไร แต่ว่าถ้าเป็น wireless ไม่ได้เลยนะครับ มันจะ power off wireless เลย

เอาละครับ เริมกันเลยน่ะ

1. เริ่มด้นด้วย การเสียบสายแลนปกติก่อน เครื่องน่าจะได้ IP จากตัว DHCP Server ของบริษัท เช้น 192.168.1.79 255.255.255.0 GW 192.168.1.1
2. เสียบ aircard แล้วก็ connect ให้เรียบร้อย น่าจะได้ IP จากทาง ISP (DTAC, AIS, TURE) เช่น 212.12.13.23 255.255.255.224 GW 212.12.13.23 (ส่วนมาก มันจะให้ GW เป็นเครื่องเราเองเลย)
3. ที่นี่ก็ทำการ route add ตามนี่เลยครับ คิดว่าการใช้งาน server ที่ทำงาน เค้าน่าจะมี IP address range ที่ขึ้นต้นด้วย 192.168.x.x ทั้งหมด แต่ถ้าที่บริษัทใช้ตัวอื่นด้วย ก็ add เพิ่มได้ครับ พิมพ์ตามนี้เลย

route add 192.168.0.0 mask 255.255.0.0 192.168.1.1 --> อันนี้เป็นการบอกว่า ถ้าไปกลุ่ม IP 192.168.x.x ให้ผ่านทาง 192.168.1.1
route add 0.0.0.0 mask 0.0.0.0 212.12.13.23  --> อันนี้เป็นการบอกว่า ถ้าไปที่ IP อื่นๆทั้งหมด ให้ผ่านทาง 212.12.13.23

เท่านี้ก็สามารถเล่นเน็ทพร้อมกับการเข้าใช้งาน server ที่ทำงานได้แล้วครับ

route add 192.168.0.0 mask 255.255.0.0 192.169.17.1
ถ้าไป        192.168.0.0 255.255.0.0 ให้ไปทาง 192.169.17.1


route add 192.169.0.0 mask 255.255.0.0 192.168.17.1
route add 0.0.0.0 mask 0.0.0.0 212.12.13.23

***
command      One of these:
               PRINT     Prints  a route
               ADD       Adds    a route
               DELETE    Deletes a route
               CHANGE    Modifies an existing route

****
ถ้าWindows Vista ต้องใช้สิทธิ์ของ Admin ในการใช้คำสั่งน่ะครับ
รูปแบบ คำสั่งก็จะเป็น C:/> route add Mask -P ( -P หมายถึงให้มัน เป็น permanent ครับ Restart ก็ยังอยู่)

ตัวอย่างเช่น

C:/> route add 172.25.30.250 mask 255.255.255.255 192.168.9.5 -P

ถ้าต้องการลบทิ้งก็

C:/> route delete 172.25.30.250


***
Manipulates network routing tables.

ROUTE [-f] [-p] [-4|-6] command [destination]
                  [MASK netmask]  [gateway] [METRIC metric]  [IF interface]

  -f           Clears the routing tables of all gateway entries.  If this is
               used in conjunction with one of the commands, the tables are
               cleared prior to running the command.

  -p           When used with the ADD command, makes a route persistent across
               boots of the system. By default, routes are not preserved
               when the system is restarted. Ignored for all other commands,
               which always affect the appropriate persistent routes. This
               option is not supported in Windows 95.

  -4           Force using IPv4.

  -6           Force using IPv6.

  command      One of these:
                 PRINT     Prints  a route
                 ADD       Adds    a route
                 DELETE    Deletes a route
                 CHANGE    Modifies an existing route
  destination  Specifies the host.
  MASK         Specifies that the next parameter is the 'netmask' value.
  netmask      Specifies a subnet mask value for this route entry.
               If not specified, it defaults to 255.255.255.255.
  gateway      Specifies gateway.
  interface    the interface number for the specified route.
  METRIC       specifies the metric, ie. cost for the destination.

All symbolic names used for destination are looked up in the network database
file NETWORKS. The symbolic names for gateway are looked up in the host name
database file HOSTS.

If the command is PRINT or DELETE. Destination or gateway can be a wildcard,
(wildcard is specified as a star '*'), or the gateway argument may be omitted.

If Dest contains a * or ?, it is treated as a shell pattern, and only
matching destination routes are printed. The '*' matches any string,
and '?' matches any one char. Examples: 157.*.1, 157.*, 127.*, *224*.

Pattern match is only allowed in PRINT command.
Diagnostic Notes:
    Invalid MASK generates an error, that is when (DEST & MASK) != DEST.
    Example> route ADD 157.0.0.0 MASK 155.0.0.0 157.55.80.1 IF 1
             The route addition failed: The specified mask parameter is invalid.
 (Destination & Mask) != Destination.


************************************************************************
Examples:

   > route PRINT
    > route PRINT -4
    > route PRINT -6
    > route PRINT 157*          .... Only prints those matching 157*

    > route ADD 157.0.0.0 MASK 255.0.0.0  157.55.80.1 METRIC 3 IF 2
             destination^      ^mask                   ^gateway metric^       ^
                                                                                      Interface^
      If IF is not given, it tries to find the best interface for a given
      gateway.
    > route ADD 3ffe::/32 3ffe::1

    > route CHANGE 157.0.0.0 MASK 255.0.0.0 157.55.80.5 METRIC 2 IF 2

      CHANGE is used to modify gateway and/or metric only.

    > route DELETE 157.0.0.0
    > route DELETE 3ffe::/32


************************************************************************ 

Examples 2

To display the entire contents of the IP routing table, type:
route print
To display the routes in the IP routing table that begin with 10., type:
route print 10.*
To add a default route with the default gateway address of 192.168.12.1, type:
route add 0.0.0.0 mask 0.0.0.0 192.168.12.1
To add a route to the destination 10.41.0.0 with the subnet mask of 255.255.0.0 and the next hop address of 10.27.0.1, type:
route add 10.41.0.0 mask 255.255.0.0 10.27.0.1
To add a persistent route to the destination 10.41.0.0 with the subnet mask of 255.255.0.0 and the next hop address of 10.27.0.1, type:
route -p add 10.41.0.0 mask 255.255.0.0 10.27.0.1
To add a route to the destination 10.41.0.0 with the subnet mask of 255.255.0.0, the next hop address of 10.27.0.1, and the cost metric of 7, type:
route add 10.41.0.0 mask 255.255.0.0 10.27.0.1 metric 7
To add a route to the destination 10.41.0.0 with the subnet mask of 255.255.0.0, the next hop address of 10.27.0.1, and using the interface index 0x3, type:
route add 10.41.0.0 mask 255.255.0.0 10.27.0.1 if 0x3
To delete the route to the destination 10.41.0.0 with the subnet mask of 255.255.0.0, type:
route delete 10.41.0.0 mask 255.255.0.0
To delete all routes in the IP routing table that begin with 10., type:
route delete 10.*
To change the next hop address of the route with the destination of 10.41.0.0 and the subnet mask of 255.255.0.0 from 10.27.0.1 to 10.27.0.25, type:
route change 10.41.0.0 mask 255.255.0.0 10.27.0.25

 
ข้อมูลจาก https://www.thaithinkpad.com/forum/index.php?topic=7257.0